# Broken Motorcycle Key Extraction and Replacement Broken key extraction removes a snapped key from a motorcycle or scooter ignition, gas cap, seat or storage lock, with the aim of leaving the lock undamaged. Source: https://themotorcyclelocksmith.com/ventura-santa-barbara/services/broken-key-extraction/ Business: The Motorcycle Locksmith, mobile motorcycle locksmith. Phone and text: (805) 429-8452 (Ventura County and Santa Barbara side). > Broken key extraction removes a snapped key from a motorcycle or scooter ignition, gas cap, seat or storage lock, with the aim of leaving the lock undamaged. We take out the broken piece where the bike is parked, check that the lock still works, and cut a new key. If your bike uses a chip key, we program it where the system allows. We do this work across Ventura County, Santa Barbara and Goleta, including Ventura, Oxnard, Thousand Oaks, Simi Valley, Camarillo, Santa Barbara and Goleta. We come to where the bike is parked. ## What to do right after a key breaks Stop turning. Every attempt with the remaining stub, pliers or a screwdriver can push the broken piece deeper or damage the parts inside the lock. Do not put glue in the keyway, since it can bond the piece to the lock and turn a simple extraction into a replacement. Keep both halves of the key together, because the pieces help when cutting the new one. If part of the key is sticking out, resist pulling it with pliers unless it slides out with no effort, since gripping it can snap off more of the blade. If the key broke with the ignition switched on, mention it when you call, because lights left on can drain the battery while you wait. ## Why motorcycle keys break Most broken keys were weakened long before they snapped. A heavy key ring swinging and bending the key as you ride, metal fatigue in a worn blade, and forcing a key into a sticky lock are the usual causes. Thin copies cut on cheap blanks tend to break more easily than original keys. If your key broke while you were turning it, the lock may be part of the problem too. **Need broken motorcycle key extraction?** Call or text with your year, make, model and location. Call or text (805) 429-8452. ## How the visit works Extraction is usually done in place without removing the ignition, but a piece lodged deep, or a lock that was already failing, may need to come out for repair. Either way, the goal is for you to finish the visit with a working lock and a working key. 1. Tell us which lock the key broke in, the year, make and model, and whether the key had a chip. 2. Show photo ID and the registration or title. 3. We remove the broken piece with extraction tools and inspect the lock. 4. We cut a new key from the pieces or from the key code. 5. If the bike has an immobilizer, we program the new key where the system allows, and you test it in every lock before we leave. ## Getting a new key after extraction Putting the old key back into service is not a good idea, even if the pieces fit together. A new key can usually be cut from the broken pieces or from the key code, and cutting to code also corrects for wear. Many bikes sold in the US use a plain key, and for those a correctly cut key is the whole job. If the key had a transponder chip, the new key has to work with your immobilizer, which may mean programming. This is also a good time to cut a spare. ## When the lock needs repair too If the key snapped because the lock was binding, removing the piece does not fix the cause, and a worn or damaged cylinder will wear down or break the new key as well. In that case the lock can often be repaired and rekeyed to your key, or replaced if it is damaged beyond repair, so the new key turns smoothly from the start. ## Preventing the next broken key Most breaks can be avoided. Keep the key ring light so the key does not bend as you ride, and replace a key as soon as you see a crack, a bend or a loose head. If a lock starts to feel stiff, have it looked at instead of forcing the key harder. A spare kept somewhere you can reach also turns a broken key into a short delay instead of a lost day. ## When you need this service - Part of the key is stuck in the ignition - The key snapped in the gas cap, seat or saddlebag lock - The key head separated from the blade - Your key is cracked or bent and close to breaking ## What does broken motorcycle key extraction cost? Typically $50 to $200 in Southern California to extract a broken key, plus the cost of a new key and any lock repair, depending on which lock it broke in, how deep the piece sits and whether a chip key must be programmed. - [See the full motorcycle key pricing guide](https://themotorcyclelocksmith.com/ventura-santa-barbara/pricing/) ## What to have ready **Have this ready when you call or text** - Both pieces of the broken key - Government-issued photo ID - Registration or title - Year, make and model - Your spare key, if you have one ## Broken Motorcycle Key Extraction FAQ ### Can I ride with the broken piece still in the ignition? It is not worth the risk. The piece can shift or jam while you ride, leaving you stranded with a lock that is harder to work on. Have it removed before riding again. ### Will extracting the key damage my ignition? Done carefully, extraction leaves the lock intact. Damage usually comes from earlier attempts with pliers, screwdrivers or glue. If the lock was already worn, it may need repair once the piece is out. ### Can you make a new key from the broken pieces? Usually, yes, as long as the cut part of the blade is intact. If pieces are missing, the key code or the lock itself can be used instead. ### What if the key broke off in the gas cap or seat lock? Extraction works the same way for gas cap, seat, steering and saddlebag locks. A key stuck in the gas cap is worth dealing with quickly, since the cap may not open until the piece is out. ## Makes we do this for [Harley-Davidson](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/harley-davidson/), [Honda](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/honda/), [Yamaha](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/yamaha/), [Kawasaki](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/kawasaki/), [Suzuki](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/suzuki/), [Ducati](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/ducati/), [BMW](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/bmw/), [Triumph](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/triumph/), [KTM](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/ktm/), [Indian](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/indian/), [Aprilia](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/aprilia/), [Moto Guzzi](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/moto-guzzi/), [Husqvarna](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/husqvarna/), [Royal Enfield](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/royal-enfield/), [Can-Am](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/can-am/), [Victory](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/victory/), [Vespa and Piaggio](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/vespa-piaggio/), [Zero](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/zero/), [MV Agusta](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/mv-agusta/), [Benelli](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/benelli/), [Beta](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/beta/), [Buell](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/buell/), [CFMOTO](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/cfmoto/), [GASGAS](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/gasgas/), [Genuine Scooters](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/genuine-scooters/), [Hyosung](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/hyosung/), [KYMCO](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/kymco/), [LiveWire](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/livewire/), [SYM](https://themotorcyclelocksmith.com/ventura-santa-barbara/makes/sym/) ## Where we offer this service [Ventura County](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/), [Santa Barbara and Goleta](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/santa-barbara-area/), [Ventura](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/ventura/), [Oxnard](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/oxnard/), [Thousand Oaks](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/thousand-oaks/), [Simi Valley](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/simi-valley/), [Camarillo](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/ventura-county/camarillo/), [Santa Barbara](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/santa-barbara-area/santa-barbara/), [Goleta](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/santa-barbara-area/goleta/), [All service areas](https://themotorcyclelocksmith.com/ventura-santa-barbara/service-areas/) ## Related services - [Motorcycle Ignition Repair and Replacement](https://themotorcyclelocksmith.com/ventura-santa-barbara/services/motorcycle-ignition-repair/): Sticking, worn or damaged ignitions repaired or replaced. - [Motorcycle Key Replacement](https://themotorcyclelocksmith.com/ventura-santa-barbara/services/motorcycle-key-replacement/): New keys cut by code or from the lock, for all major makes. - [Gas Cap, Seat, Steering and Saddlebag Locks](https://themotorcyclelocksmith.com/ventura-santa-barbara/services/motorcycle-lock-repair/): Gas cap, seat, steering, helmet and saddlebag locks. ## Related guides - [Broken Motorcycle Key in the Ignition: What to Do](https://themotorcyclelocksmith.com/ventura-santa-barbara/guides/broken-motorcycle-key-in-ignition/): If your key snaps in the motorcycle ignition, stop, keep both pieces, and do not try to turn the cylinder with the stub or dig the fragment out with a knife or screwdriver. - [Motorcycle Key Won't Turn in the Ignition? Causes and Fixes](https://themotorcyclelocksmith.com/ventura-santa-barbara/guides/motorcycle-key-wont-turn-ignition/): When a motorcycle key will not turn, the usual causes are a steering lock under tension, a worn or bent key, worn wafers inside the ignition, dirt or corrosion in the cylinder, or simply the wrong key.