Husqvarna Svartpilen 801 and Vitpilen 801 Key Replacement

Quick answerThe 801 twins use a conventional ignition key. Husqvarna's 2024 US owner's manual for the Svartpilen 801 gives a key number on the KEYCODECARD, shows the same key working the fuel filler cap and the seat lock, and gives no key activation procedure, though its fuse table names an immobilizer circuit. If your keys are gone, a new one is cut to the locks on the bike, and we confirm from your VIN whether it also has to be registered to the bike.

Husqvarna Svartpilen 801 and Vitpilen 801 key quick facts

The 2024 US Svartpilen 801 manual places the ignition and steering lock in front of the upper triple clamp.
The ignition key can be removed in two positions: ignition off and steering locked.
The seat lock is on the left side of the vehicle and is worked with the ignition key.
To close the filler cap, the manual has you press the cap down while turning the ignition key counterclockwise, then check that it has locked.
The 801 models are built on the parallel-twin platform of KTM's 790 Duke.

Husqvarna Svartpilen 801 and Vitpilen 801 key types by year

Years	Models	Key type	Chip	Notes
2024-present	Svartpilen 801	conventional ignition key	varies	The 2024 US manual lists a key number, ignition and steering lock, filler cap, seat lock and tool set, and no immobilizer chapter, but its fuse table names an immobilizer circuit. Tell us the year and VIN and we confirm whether the key carries a chip.
2025-present	Vitpilen 801	conventional ignition key	varies	Sister model on the same platform, so the same check applies. Give the exact model when ordering, since bodywork and seat parts differ.

The 801 key in Husqvarna's own words

Husqvarna's US manual for the 2024 Svartpilen 801 keeps the key simple. Under serial numbers it says the key number can be found on the KEYCODECARD. Under controls it describes an ignition and steering lock with three positions. In the off position the ignition circuit is interrupted and a running engine stops. In the on position the circuit is closed and the engine can be started. In the steering locked position the circuit is interrupted and the steering is locked. The key comes out in the first and third.

The table of contents runs from the key number to the ignition lock, the filler cap, the seat lock and the tool set without any entry for an immobilizer or an alarm. The one place the word immobilizer appears is the fuse table, where fuse 2 lists it among the circuits it protects. The manual gives the owner no way to add or register a key, so we check your VIN for a chipped key before we cut one.

Need a key for your Svartpilen 801?

Call or text with the year and where the bike is parked.

Call (619) 775-1858 Text your year, make and model

Or read first: all services · common questions · about us · contact details

Seat lock and filler cap

Apart from the ignition there are two places the key is used. The seat lock is on the left side of the vehicle. The fuel tank filler cap sits under a cover on top of the tank, and the closing instruction is specific: hold the cap down while you turn the key counterclockwise until the lock closes, confirm that it is locked, then take the key out and shut the cover. If the key feels stuck there, check that the cap is pressed down while the key turns.

Buying or selling an 801

These are new enough that most have had one owner, and the full set should still exist: two keys and the KEYCODECARD. If you are buying used, ask for all three. A missing card is not a disaster, since a key can be made from the lock, but it is a sign to get a spare cut straight away. If you are selling, hand the card over with the keys; the next owner will need the number if they ever order a key through a dealer.

When no key is left

Husqvarna dealers order keys by key number, and how long that takes varies. A mobile visit skips the order. We look at your photo ID and the registration or title, make a key from the bike's own ignition lock, and test it in the steering lock, the left-side seat lock and the filler cap. If your bike's key carries a chip, the new key also has to be registered to the bike, and we tell you before the visit whether that can be done on site. Tell us whether you have a Svartpilen or a Vitpilen and the model year, and mention any tail tidy or seat changes that moved the seat lock.

Where to find the key code

The 2024 US Svartpilen 801 manual says the key number can be found on the KEYCODECARD. The card is supplied with the keys, so check the owner's manual pouch and the paperwork from the selling dealer.

What to have ready

Have this ready when you call or text

Year, make and model of the bike
Where the bike is parked
Whether you have any working key, a broken key or a key code
Photo ID and registration or title (we verify ownership before making a key)

Husqvarna Svartpilen 801 and Vitpilen 801 key FAQ

Does the Svartpilen 801 have keyless ignition?

No. The 2024 US owner's manual describes an ignition and steering lock in front of the upper triple clamp that takes an ignition key.

Is there a chip in the Vitpilen or Svartpilen 801 key?

The 2024 US Svartpilen 801 manual has no immobilizer chapter and treats the key as a cut key identified by a key number, but its fuse table names an immobilizer circuit. We confirm from your VIN whether your key carries a chip before cutting one.

My key will not come out of the fuel cap. What now?

The manual closes the cap by pressing it down while turning the key counterclockwise. Try that with firm, even pressure. If the key still will not release, stop before it bends and have the lock looked at.

Can a KTM 790 Duke key be used on an 801?

No. The platforms are related, but each key is cut for one motorcycle's locks.

More Husqvarna models

Services for this bike

How Many Keys Should Come With a Used Motorcycle?Most motorcycles are delivered with two keys or fobs, and many also come with a third item that matters more than either: a master or programming key, a code card, a key number tag or a security PIN.
Motorcycle Key Stuck in the Ignition: Causes and What to DoA motorcycle key that will not come out is most often sitting in a position where the switch is designed to hold it, usually ON or partway between two positions.
Lost Your Only Motorcycle Key? What to Do NextIf you lost the only key to your motorcycle, a new one can almost always be made, but the route depends on whether your bike uses a plain metal key, a chipped transponder key, or a keyless fob.
Kawasaki KIPASS Warnings: NO TRANSPONDER and OthersOn a Kawasaki Concours 14, NO TRANSPONDER means the bike cannot find its KIPASS fob nearby, and you have about 10 seconds, while the warning symbol is showing, to bring a registered fob back and switch on again.

Where we come to you

Sources

Page last updated November 14, 2026.